| Eίδος | Τιμή |
|---|---|
| bike stand, for all wheels sizes black, plastic | 19,65 € |
| bike stand DUO blue/black floor-mountable | 59,95 € |
| workshop stand with tool shelf for bikes with any wheel size | 282,92 € |
| rear wheel stand MTB | 16,91 € |
| wall bracket to hold top tube | 15,36 € |
| wall bracket bicycle | 10,42 € |
| cycle stand MTB/ATB | 17,81 € |
| plastic holder for art. 290006 | 15,71 € |
| wire brush 2 rows | 4,93 € |
| wire brush 3 rows | 5,11 € |
| wire brush 4 rows | 5,52 € |
| sponge brush | 5,11 € |
| frame tube and tire cleaning brush | 4,23 € |
| tapered multi-purpose cleaning brush | 4,23 € |
| gear cleaning scratch | 2,60 € |
| round cleaning brush | 2,39 € |
| cleaning brush, 130 x 25mm | 3,80 € |
| cleaning brush, 70 x 50 mm | 3,80 € |
| chain cleaning set | 23,71 € |
| thread cutter M 3 | 3,42 € |
| thread cutter M 5 | 3,42 € |
| head set spanner SW 32, plasticated handle | 13,75 € |
| head set spanner SW 34, plasticated handle | 13,75 € |
| head set spanner SW 36, plasticated handle | 13,75 € |
| head set spanner SW 38, plasticated handle | 13,75 € |
| head set spanner SW 44, plasticated handle | 13,75 € |
| cutting oil in dispenser bottle, 100ml | 13,87 € |
| chain lubricant, 200 ml spray | 9,34 € |
| silicone oil for general oiling, 200 ml spray | 5,66 € |
| degreaser, e.g. disk brakes. 200 ml spray | 5,66 € |
| lubricant "white", highly effective for ball bearings, hubs etc. 500 g dose | 16,29 € |
| bike cleaner, 500 ml spray gun | 7,56 € |
| hand cleaner, 500 g dose | 8,21 € |
| bike cleaner, 5l can | 61,32 € |
| chain cleaning fluid, 1l bottle | 10,75 € |
| lubricant "white", 100 g tube | 6,42 € |
| steerer threader 1", complete with die | 96,77 € |
| steerer threader 1 1/8", complete with die | 96,77 € |
| crownrace cutter 1", 26,4 mm, complete | 64,94 € |
| crownrace cutter 1 1/8" complete | 64,94 € |
| head tube reamer/ facer 1", complete | 119,81 € |
| head tube reamer/ facer 1 1/8" complete | 119,81 € |
| bottom bracket shell facing tool, complete | 116,01 € |
| bottom bracket threading tool BSA, complete | 78,14 € |
| headset press 1" & 1 1/8" | 39,22 € |
| gear hanger alignment tool | 28,85 € |
| drop out alignment tool (pair) | 38,40 € |
| crown race fitting tool 1" & 1 1/8" | 29,14 € |
| rim repair tool, pushing tool | 40,82 € |
| pedal thread cutters, pair right/ left | 26,22 € |
| chain rivet extractor, with chain adjuster | 8,61 € |
| crank repair set, complete | 182,85 € |
| spoke ruler, metal | 16,82 € |
| steerer threader die 1", spare | 71,54 € |
| steerer threader die 1 1/8", spare | 71,54 € |
| crown race remover 1" & 1 1/8" | 22,81 € |
| bottom bracket tap ITAL, spare | 60,12 € |
| crown race cutter 1" (26.4mm), spare | 48,56 € |
| crown race cutter 1 1/8", spare | 48,56 € |
| head tube reamer 1", spare | 79,42 € |
| head tube reamer 1 1/8", spare | 79,42 € |
| b/bracketshell facer, spare | 50,34 € |
| b/bracket tap BSA, spare | 60,12 € |
| bottom bracket threading tool ITAL, complete | 78,14 € |
| rim repair tool, for pulling out dents | 104,77 € |
| frame alignment checking tool | 33,52 € |
| head tube reamer 1 1/4", spare | 76,62 € |
| Thompson bottom bracket press | 290,98 € |
| crownrace cutter 1", 27.0 mm, complete | 63,07 € |
| spare repair pedal bushes, pair | 4,06 € |
| wheel dishing tool | 93,06 € |
| nipple driver, extra long for high-profile rims | 15,91 € |
| replacement spindle for 720009, trapeze thread | 8,03 € |
| cone spanner, plastic coated handles, 12 mm | 9,99 € |
| cone spanner, plastic coated handles, 13 mm | 9,99 € |
| cone spanner, plastic coated handles, 14 mm | 9,99 € |
| cone spanner, plastic coated handles, 15 mm | 9,99 € |
| cone spanner, plastic coated handles, 16 mm | 9,99 € |
| cone spanner, plastic coated handles, 17 mm | 9,99 € |
| head tube reamer/ facer 1 1/4" complete | 119,81 € |
| pedal spanner doublesided 15mm | 26,69 € |
| spoke thread rolling machine for 2mm spokes | 3.358 € |
| bearing set for headset press 720009 | 8,58 € |
| pedal thread cutters for repair bushes | 84,36 € |
| chain whip | 9,29 € |
| steerer cutting guide, 1" and 1 1/8" | 61,35 € |
| cassette lockring tool Shimano and Campagnolo | 11,45 € |
| thread cutter M 10 x 1 | 8,47 € |
| cassette lockring tool Shimano only | 8,85 € |
| cassette lockring tool Campagnolo only | 8,85 € |
| axle vice springloaded, 9mm and 10mm | 31,42 € |
| chainset alignment tool | 18,66 € |
| chainring bolt tool | 11,86 € |
| crank extractor oversize, for 720017 | 7,53 € |
| handles for seat tube reamers | 49,00 € |
| chain wear indicator | 13,69 € |
| crank extractor, for square taper | 7,36 € |
| spoke key "PROFI", 3.25 mm | 6,28 € |
| spare repair pedal bush, right | 2,07 € |
| spare repair pedal bush, left | 2,07 € |
| bottom bracket tool, Campagnolo | 5,55 € |
| cassette tool ATOM, MAILARD, REGINA, SUNTOUR | 9,37 € |
| casette tool Shimano | 5,55 € |
| remover of sprocket bearer and lock ring on MICHE track hub | 14,10 € |
| freewheel remover Sachs | 5,55 € |
| bottom bracket tool Shimano | 4,85 € |
| repair cutter for gear hanger (Al frames) | 51,01 € |
| repair bush for gear hanger, spare | 2,34 € |
| replacement spindle for 720016 | 3,74 € |
| freewheel remover Suntour, 4 prong | 4,85 € |
| cassette tool Campagnolo | 5,55 € |
| workshop wheel truing stand | 299,65 € |
| workshop fixed cup tool, conventional bottom brackets | 24,27 € |
| crownrace cutter 1", spare (27.0) | 48,56 € |
| star fangled nut setter 1" & 1 1/8" | 38,78 € |
| spoke key, forged, various sizes | 1,14 € |
| seat tube reamer 25.0 mm | 32,38 € |
| seat tube reamer 25.4 mm | 32,38 € |
| seat tube reamer 25.8 mm | 32,38 € |
| seat tube reamer 26.2 mm | 32,38 € |
| seat tube reamer 26.8 mm | 32,38 € |
| seat tube reamer 27.0 mm | 32,38 € |
| seat tube reamer 27.2 mm | 32,38 € |
| seat tube reamer 28.6 mm | 32,38 € |
| seat tube reamer 29.8 mm | 32,38 € |
| seat tube reamer 30.0 mm | 32,38 € |
| seat tube reamer 31.6 mm | 32,38 € |
| seat tube reamer 31.8 mm | 32,38 € |
| seat tube reamer extension | 19,04 € |
| feeler gauge steerer set 33.8/34.0mm (1 1/8 ") | 53,26 € |
| feeler gauge steerer set 29.8/30.0mm (1") | 53,26 € |
| dual disc-mount facing tool complete with cutters, 16mm, for extra wide discs | 450,67 € |
| adapter to apply electric drill on disc mount facing tool | 26,60 € |
| "Third Hand" holder | 668,68 € |
| workshop chain tool, fits to all 7 to 10 speed SH chains | 37,81 € |
| hub-cup-extractor, front hubs Campagnolo, 11,4mm | 24,27 € |
| hub-cup-extractor, rear hubs Campagnolo, 12,95mm | 24,27 € |
| hub-cup-extractor, OS-hubs Campagnolo | 27,59 € |
| hub-cup-press, all hubs Campagnolo, front & rear | 78,11 € |
| chain wear indicator, to measure over 11 chain links | 28,29 € |
| torque wrench, 20/100 Nm, 345 mm | 210,79 € |
| torque wrench, 4/20 Nm, 220 mm | 262,74 € |
| crank holder for chainring mounting (Octalink and square taper) | 52,97 € |
| nylon brush | 7,07 € |
| wire brush 10 mm | 6,39 € |
| die holder, adjustable, 2 - 4.5 mm | 8,15 € |
| die holder, adjustable, 3.5 - 9 mm | 14,19 € |
| die holder, adjustable, 5.6 - 16 mm | 26,69 € |
| die holder, adjustable, 3.15 - 6.3 mm | 10,89 € |
| chain whip, 9/10 speed chains | 11,21 € |
| cutting oil, 500ml | 23,36 € |
| crank extractor Octalink Shimano | 8,64 € |
| bolt through axle clamp for wheel jigs, 20 mm axle only | 24,50 € |
| KNIPEX cable cutter | 53,09 € |
| head tube reamer IHS CAMPAGNOLO top 42/3.0/45° | 135,49 € |
| head tube reamer IHS CAMPAGNOLO bottom 42/6.9/45° | 135,49 € |
| head tube reamer IHS 42/2.4/45° | 135,49 € |
| head tube reamer IHS 42/6.0/45° | 135,49 € |
| seat tube reamer 31,4 mm | 32,38 € |
| cantilever boss repair set, complete | 19,13 € |
| universal crown race remover (for suspension forks, IHS..) | 300,47 € |
| caliper to determine chain ring diameter | 71,01 € |
| bottom bracket threading tool 1.370" x 24 tpi | 117,12 € |
| bottom bracket threading tool 36" x 24 tpi | 117,12 € |
| bottom bracket tap, 1.370" x 24 tpi, spare | 71,98 € |
| bottom bracket tap, 36 x 24 tpi, spare | 71,98 € |
| dual disc-mount facing tool | 450,67 € |
| head tube reamer IHS 41.7/2.3/36° | 135,49 € |
| head tube reamer IHS 41.7/6.5/36° | 135,49 € |
| head tube reamer / facer 1 1/2", complete | 135,49 € |
| head tube reamer IHS 44/6.0/45° | 135,49 € |
| bottom bracket threading and facing tool 1,370" x 24 tpi | 454,41 € |
| head tube reamer IHS 44/8.2/45° | 135,49 € |
| crownrace cutter 1 1/8" incl. cutting inserts, for carbon, alloy and steel crownraces | 302,63 € |
| nipple driver, adjustable pin length | 26,13 € |
| cassette lockring tool, Shimano solid axles | 11,45 € |
| feeler gauge IHS head tubes | 16,03 € |
| cone spanner, 19 mm, handles with plastic coating | 9,99 € |
| cone spanner, 22 mm, handles with plastic coating | 9,99 € |
| cone spanner, 24 mm, handles with plastic coating | 9,99 € |
| seat tube reamer 32.4 mm | 32,38 € |
| seat tube reamer 30.2 mm | 32,38 € |
| seat tube reamer 29.2 mm | 32,38 € |
| seat tube reamer 34.9 mm | 32,38 € |
| seat tube reamer 30.9 mm | 32,38 € |
| BMX freewheel remover | 6,69 € |
| freewheel remover, BMX 10 mm axle | 6,69 € |
| bottom bracket tool ISIS Drive | 5,96 € |
| bottom bracket tool FAG drive | 8,73 € |
| bottom bracket tool Campa UT + Howitzer, 3/8" | 31,42 € |
| crank mounting tool, Shimano Hollowtech 2 FC-M960, M760, M800, FC-7800 | 5,02 € |
| crank bolt socket 14 mm, 3/8" | 12,82 € |
| crank bolt socket 15 mm, 3/8" | 12,82 € |
| headcup remover 1 1/2" | 58,43 € |
| headset press 1 1/2 " | 48,65 € |
| crown race fitting tool 1 1/2 | 42,02 € |
| headset press | 48,65 € |
| headcup remover 1" | 30,46 € |
| headcup remover 1 1/8" | 30,46 € |
| KNIPEX multiple slip joint spanner 10-32 mm | 42,31 € |
| KNIPEX high leverage diagonal cutter, length 250 mm | 45,87 € |
| KNIPEX self-adjusting insulation stripper, capacity 0,2-6,0 mm | 45,87 € |
| freewheel remover Atom-Mailard-Regina-Suntour, 3/8" | 9,69 € |
| freewheel remover, Sachs and screw-on-freewheels, 3/8" | 9,69 € |
| freewheel remover Suntour 4 prong, 3/8" | 9,69 € |
| bottom bracket tool ISIS Drive 3/8" | 12,82 € |
| bottom bracket tool Shimano 3/8" | 12,82 € |
| bottom bracket tool, Campagnolo cartridge 3/8" | 12,82 € |
| casette tool Shimano, 3/8" | 9,69 € |
| workshop bottom bracket tool Shimano Hollowtech 2, 3/8" | 15,71 € |
| cassette tool Campagnolo, 3/8" | 9,69 € |
| socket SW 28, 3/8" drive, to use torque wrench with bottom bracket mounting tools | 22,95 € |
| b/bracket tool Shimano 20-tooth cartridge, with handles | 56,36 € |
| b/bracket tool Shimano Octalink, with handles | 56,36 € |
| b/bracket tool Campagnolo cartridge, with handles | 56,36 € |
| b/bracket tool Campagnolo (Centaur, Mirage), FAG etc. with handles | 56,36 € |
| b/bracket tool Shimano 8-notch cartridge, with handles | 56,36 € |
| b/bracket tool Shimano 6-notch cartridge, with handles | 56,36 € |
| b/bracket tool Shimano Hollowtech II | 56,36 € |
| b/b tool Campa UT + Howitzer, with handles | 78,23 € |
| bottom bracket threading and facing tool ITAL (36 x 24 tpi) | 454,41 € |
| crown race double-side cutter 26.5mm, spare | 95,83 € |
| crown race double-side cutter 26.6mm, spare | 95,83 € |
| crown race double-side cutter 27.1mm, spare | 95,83 € |
| crown race double-side cutter 27.2mm, spare | 95,83 € |
| crown race double-side cutter 30.1mm, spare | 95,83 € |
| crown race double-side cutter 30.2mm, spare | 95,83 € |
| handle for crown race double-side cutters, w/o cutters | 51,16 € |
| test bar to determine diameter of a crown race | 79,83 € |
| crown race double-side cutter 26.4mm, spare | 95,83 € |
| crown race double-side cutter 27.0mm, spare | 95,83 € |
| crown race double-side cutter 30,0mm, spare | 95,83 € |
| bearing extractor for Campagnolo UT | 240,58 € |
| bearing press tool for Campagnolo UT | 86,05 € |
| bearing inner ring extractor for Campagnolo UT bb | 19,18 € |
| wrench for aerodynamic spokes, plastic | 5,52 € |
| facer for cantilever boss | 88,18 € |
| facer to face screw head surface | 91,10 € |
| dual disc "Postmount" facing tool, for frame and fork, complete with facers 16mm | 773,80 € |
| spoke thread rolling dies 2.34mm, pair (to use in art. 720048) | 1.416 € |
| spare facer for dual disc postmount facing tool, pair | - |
| full axle adapter 12mm for dual disc postmount facing tool | - |
| full axle adapter 15mm for dual disc postmount facing tool | - |
| bleeder for disc brakes incl. adapter for MAGURA and BEES brakes | 105,15 € |
| syringe for disc brake bleeder, spare | 17,49 € |
| lineman's pliers, 180 mm, multicomponent grips | 21,55 € |
| long nose pliers, straight, 200 mm, multicomponent grips | 22,63 € |
| long nose pliers, bent, 200 mm, multicomponent grips | 26,66 € |
| pliers for external circlips, straight, 190 mm, multicomponent grips | 20,62 € |
| pliers for internal circlips, straight, 185 mm, multicomponent grips | 17,90 € |
| multigrip pliers 250 mm, multicomponent grips | 21,90 € |
| locksmith's hammer (ash wood), 400 gr | 9,29 € |
| locksmith's hammer (ash wood), 200 gr | 8,38 € |
| rubber mallet 410g, ash wood-handle | 7,45 € |
| chain rivet pliers removing all chains | 63,57 € |
| flat screwdriver 3 x 80, black tip | 5,58 € |
| flat screwdriver 4 x 100, black tip | 5,58 € |
| flat screwdriver 5.5 x 125, black tip | 6,04 € |
| flat screwdriver 6.5 x 250, black tip | 7,24 € |
| replacement pin for chain rivet pliers 720509 | 4,18 € |
| spoke key plastic 3.25 mm | 1,72 € |
| spoke key plastic 3.45 mm | 1,72 € |
| spoke key TOP 3.25/3.45 mm | 8,32 € |
| tire seater, various sizes | 40,88 € |
| vernier caliper in plastic case | 20,88 € |
| screwdriver phillips 0 x 60, black tip | 4,12 € |
| screwdriver phillips 1 x 100, black tip | 5,23 € |
| screwdriver phillips 2 x 125, black tip | 6,57 € |
| screwdriver TX 6 x 60, black tip | 5,58 € |
| screwdriver TX 8 x 60, black tip | 5,58 € |
| screwdriver TX 10 x 80, black tip | 5,58 € |
| screwdriver TX 15 x 80, black tip | 5,58 € |
| screwdriver TX 20 x 100, black tip | 6,25 € |
| screwdriver TX 25 x 100, black tip | 7,24 € |
| screwdriver TX 30 x 115, black tip | 8,50 € |
| set of screwdrivers for precision mechanics (4 flat/ 2 phillips) in plastic box | 22,28 € |
| screwdriver TX 25 x 120, with T-handle | 7,30 € |
| screwdriver TX 30 x 120, with T-handle | 8,67 € |
| tool set 3/8" drive with torque wrench | 354,55 € |
| tool set 3/8" drive with reversible ratchet | 111,84 € |
| hexagon socket 10mm, 3/8" drive, 90mm shaft | 7,88 € |
| hexagon pinspanner, 5 mm T-Handle, 350 mm | 6,34 € |
| socket HX 8mm, 3/8" | 3,85 € |
| file flat, 250 mm | 18,78 € |
| file square, 250 mm | 16,24 € |
| file triangualar, 250 mm | 17,20 € |
| file round, 250 mm | 14,40 € |
| file half-round, 250 mm | 20,03 € |
| reversible ratchet with switcher, 3/8" | 25,58 € |
| socket TX 10, 3/8" | 3,47 € |
| socket TX 15, 3/8" | 3,47 € |
| socket TX 20, 3/8" | 3,47 € |
| socket TX 25, 3/8" | 3,47 € |
| socket TX 30, 3/8" | 3,47 € |
| socket HX 6mm, 3/8" | 3,85 € |
| socket HX 5mm, 3/8" | 3,85 € |
| socket HX 4mm, 3/8" | 3,85 € |
| extension bar, 75mm, 3/8" | 11,80 € |
| T-Handle, 165mm, 3/8" | 11,80 € |
| hexagon pinspanner, 4 mm T-Handle, 150 mm | 5,05 € |
| hexagon pinspanner, 5 mm T-Handle, 150 mm | 5,75 € |
| hexagon pinspanner, 6 mm T-Handle, 350 mm | 6,34 € |
| workbench, 3 drawers, multiplex surface H890/L1400/W600/ 67kg | 752,31 € |
| tool trolley, 5 drawers, powdercoated H820/B615/T425/ 45 kg | 835,67 € |
| tube inflator air tube auto/sclaverand valve | 37,52 € |
| workshop apron | 16,26 € |
| adjustable spanner, replaceable pins | 17,99 € |
| cable stretching pliers | 17,99 € |
| hexagon wrench 8 mm with plastic handle, to mount side stand on bike | 10,19 € |
| wall stand H: 600 W: 970 D: 20 | 89,12 € |
| tool holder (e.g. combination wrenches), mountable on wall stand 720566 | 8,09 € |
| tool holder (e.g. screwdriver), mountable on wall stand 720566 | 7,01 € |
| tool holder 5 clamps (e.g. screwdriver), mountable on wall stand 720566 | 8,09 € |
| combination wrench 8mm | 4,38 € |
| combination wrench 10mm | 5,23 € |
| combination wrench 13mm | 6,02 € |
| combination wrench 14mm | 6,16 € |
| combination wrench 15mm | 6,66 € |
| combination wrench 16mm | 6,92 € |
| combination wrench 17mm | 7,68 € |
| combination wrench 27mm | 15,53 € |
| tool holder (e.g. hammers), mountable on wall stand 720566 | 5,93 € |
| hooks (20pcs) for wall stand 720566, mixed length 60/80 mm | 10,45 € |
| hexagon wrench 6 mm with plastic handle | 7,80 € |
| hexagon wrench 10 mm with plastic handle | 12,85 € |
| chain rivet pliers removing wide chains 1/2 x 1/8 " | 69,88 € |
| punch pliers for plastic mud guards - SOLD OUT, no new model! | - |
| rear stay opening pliers for easier tire mounting on rear wheel on bikes with closed chain system | 61,61 € |
| KNIPEX cycle pliers, for very narrow screw conections | 32,56 € |
| KNIPEX "CoBolt" compact bolt cutters, exceptional cutting performance | 56,94 € |
| KNIPEX high leverage diagonal cutter, length 180mm | 36,38 € |
| KNIPEX angle nose battery pliers | 29,17 € |
| KNIPEX bolt cutter | 193,30 € |
| KNIPEX electronic super-knips, for ultra-fine cutting work | 28,47 € |
| KNIPEX cutter for hydraulic tubes | 61,47 € |
| cabinet for work bench with 3 drawers | 405,88 € |
| hexagon box spanner 3mm with multicomponent T-grip 250 mm blade | 6,13 € |
| hose for tube inflator 720561, spare | 15,33 € |
| measuring tape 3.00m/10 feet, reverse lock, automatic tape pull-in | 4,35 € |
| magnetic collector for small parts, stainless steel, rectangular | 17,08 € |
| magnetic collector for small parts, stainless steel, round | 9,02 € |
| spoke wrench for SHIMANO wheels, 4.3 + 4.4mm | 5,81 € |
| spoke wrench for MAVIC wheels | 5,81 € |
| hexagon ball-end spanner 2mm, multicomponent T-grip, 100 mm blade | 5,40 € |
| hexagon ball-end spanner 2,5mm, multicomponent T-grip, 100 mm blade | 5,40 € |
| hexagon ball-end spanner 3mm, multicomponent T-grip, 100 mm blade | 5,40 € |
| hexagon ball-end spanner 4mm, multicomponent T-grip, 150 mm blade | 5,96 € |
| hexagon ball-end spanner 5mm, multicomponent T-grip, 150 mm blade | 6,75 € |
| hexagon ball-end spanner 6mm, multicomponent T-grip, 200 mm blade | 6,57 € |
| hexagon ball-end spanner 8mm, multicomponent T-grip, 200 mm blade | 9,49 € |
| hexagon ball-end spanner 10mm, multicomponent T-grip, 200 mm blade | 16,06 € |
| hexagon ball-end wrench 2mm, long version 85x16 | 1,78 € |
| hexagon ball-end wrench 2,5mm, long version 90x18 | 1,78 € |
| hexagon ball-end wrench 3mm, long version 95x20 | 1,84 € |
| hexagon ball-end wrench 4mm, long version 110x25 | 2,57 € |
| hexagon ball-end wrench 5mm, long version 130x28 | 2,74 € |
| hexagon ball-end wrench 6mm, long version 150x32 | 3,47 € |
| hexagon ball-end wrench 8mm, long version 170x36 | 5,84 € |
| hexagon ball-end wrench 10mm, long version 190x40 | 8,53 € |
| steerer cutting guide 1" | 11,36 € |
| steerer cutting guide 1 1/8" | 11,36 € |
| head tube reamer IHS spare, CAMPAGNOLO top 42/3.0/45° | 84,45 € |
| head tube reamer IHS spare, CAMPAGNOLO bottom 42/6.9/45° | 84,45 € |
| head tube reamer IHS spare, 42/2.4/45° | 84,45 € |
| head tube reamer IHS spare, 42/6.0/45° | 84,45 € |
| head tube reamer IHS spare, 44/8.2/45° | 84,45 € |
| head tube reamer IHS spare, 41.7/2.3/36° | 84,45 € |
| head tube reamer IHS spare, 41.7/6.5/36° | 84,45 € |
| head tube reamer 1 1/2", spare | 84,45 € |
| head tube reamer IHS spare, 44/6.0/45° | 84,45 € |
| facer spare for disc-mount tool 720144, 16mm (pair) | 73,06 € |
| facer spare for disc-mount tool 720144, 12mm (pair) | 73,06 € |
| bb facer spare for 720149 or 720220, (pair) | 81,29 € |
| bb tap spare BSA for 720149 (pair) | 74,37 € |
| bb tap spare ITAL for 720220 (pair) | 74,37 € |
| claw spare for 720137, 1 " | 87,02 € |
| claw spare for 720137, 1 1/8" | 87,02 € |
| chain rivet extractor, with chain adjuster, blister card | 8,91 € |
| chain whip, blister card | 9,46 € |
| cassette lockring tool Shimano and Campagnolo, blister card | 11,65 € |
| thread cutter M 10 x 1, blister card | 8,70 € |
| cassette lockring tool Shimano only, blister card | 9,11 € |
| cassette lockring tool Campagnolo only, blister card | 9,11 € |
| chainring bolt tool, blister card | 12,15 € |
| crank extractor, standard size with barrel bearing, blister card | 7,56 € |
| bottom bracket tool, Campagnolo, blister card | 5,84 € |
| cassette tool ATOM, MAILARD, REGINA, SUNTOUR , blister card | 9,37 € |
| casette tool Shimano, blister card | 5,84 € |
| freewheel remover Sachs, blister card | 5,84 € |
| bottom bracket tool Shimano, blister card | 5,02 € |
| freewheel remover Suntour, 4 prong, blister card | 5,02 € |
| cassette tool Campagnolo, blister card | 5,84 € |
| spoke key, forged, various sizes, blister card | 1,34 € |
| chain whip, 9/10 speed chains, blister card | 11,48 € |
| crank extractor Octalink Shimano, blister card | 8,94 € |
| cassette lockring tool, Shimano solid axles, blister card | 11,65 € |
| BMX freewheel remover 16mm axle, blister card | 6,92 € |
